Measuring Cup polypropylene, open handle, stackable, scale blue, raised imprint

Multimeter Economy with large LCD-Digits  Designed to measure: DC voltage: 0 - 500V; AC voltage: 0 - 500V; DC current: 0 - 2A; Resistance: 0 - 2Mohm; diodes; transistors (hFE NPN PNP)

Pyrometer Lightweight infrared pyrometer with red laser beam for non-contact measurement of surface temperatures. The infrared pyrometer measures the temperature of surfaces non-destructively and from a greater distance using an infrared beam. This lightweight infrared pyrometer is characterised by its ease of use. You can precisely aim at the surface with the infrared thermometer and measure the temperature. The display illumination can be switched on or off. The infrared pyrometer has a visible aiming aid for precise aiming, contactless and fast temperature measurement from a safe distance on hot or moving objects or at measuring points that are difficult to access. The emission value of this infrared pyrometer is fixed at 0.95 and thus covers 90 % of all temperature measurement tasks.  Fast measurement sequence - Measured value display eligibly in °C or F - Fixed emission ratio - measuring spot ratio 12 : 1 - Automatic switch-off - Battery operation - Shiftable focus help - compact and robust design  Technical Specifications Temperature measuring range -50 °C ... +380 °C Resolution 0,1 °C Accuracy to 18 °C, <80 % r.F. ±4 °C (-30 °C ... 0 °C) ±2% oder ±2 °C (0 °C ... +330 °C) Measuring point size 12 : 1 Emission ratio (fest eingestellt) 0,95 LC Display yes Response time < 1 s Power Supply 9V bloc battery Dimensions 82 x 41,5 x 160 mm Weight 180 g  Delivery content 1 x infrared thermometer, 1 x battery, 1 x carry bag, 1 x instruction manual

Thickness Gauge Aluminium Measuring Range: 50-10000 µm

Roughness / dew point measuring template the template shows the roughness depth or the dew point via 2 different curves

Folding Rule wooden 2 m

Vernier Calpier digital 150 mm, display in mm or inch

Steel measuring tape 50m

Level Aluminium

Measuring Wedge Measuring range 1-20 mm Reading 1 mm Ratio of slope:length 1:5 Aluminum with etched scale

Odometer The Odometer measurements up to 9,999.9 metres. Long measurements can be carried out comfortably and without bending down by a single person with this distance measuring wheel. The robust construction makes this distance measuring wheel insensitive to bad weather and other environmental influences. The wheel automatically measures up to 9,999.9 metres high and allows both forward and backward measurements. - Foldable handle - telescopic handle - forward movement adds, backward movement subtracts - reset lever for zeroing the meter - easy to read digits - 7 mm high - retractable parking stand  Technical specification Measuring range 9,999.9 m accuracy ±1 % resolution 1 cm Wheel diameter 318.5 mm (circumference 1 m) Wheel type plastic Housing ABS plastic Weight 1500 g  Containing Road measuring wheel, operating instructions, carrying bag

Laser Range Finder 100 m with lot of functions: addition / subtraction / area computation/ volume computation / Pythagoras functions, for quick, easy and safe measurement Power supply 2 x AAA batteries (incl.), dimension 12 x 54 x 30 mm

Psychrometer MT-Professional With this thermohygrometer you can determine the indoor climate (room temperature, relative humidity) or by infrared measurement the surface temperature of walls or products. The measuring device gives you the dew point (dew point temperature) as additional information   Technical Datas Temperature range: -50 to +150 degrees Celsius Air temperature range: internal temperature sensor from -10 to +50 degrees Celsius Humidity range: 5% to 99% Moisture tolerance +/- 2% Temperature tolerance +/- 0.3 degrees Celsius Power supply 2 X 1.5V AA (incl.) Dimensions 145 x 79 x 27 mm  Monochrome graphic display with backlight, resolution 128 x 64 pixels  Multilingual menu  Automatic dew point calculation  Automatic switch off  Calibration certificate

Psychrometer with external temperature sensor, memory, RS-232

Thermo Hygrometer Economy this thermo-hygrometer is designed for a quick measurement of air humidity and temperature. The thermo-hygrometer gives you additional information about the dew point (dew point temperature) in the room as well as the wet bulb temperature.  Technical specification Measuring ranges 0 ... 100% RH  -30 ... +100 ° C Resolution 0.01% RH  0.01 ° C Accuracy ± 2% RH at 25 ° C / 20 ... 80% RH  otherwise ± 2.5% RH  ± 0.5 ° C at 25 ° C  otherwise ± 1 ° C Response time approx. 10 seconds (90% at 25 ° C air temperature) Display 4.5-digit dual LC display with backlight Storage conditions -10 ... 60 ° C / <80% RH Operating conditions -10 ... 40 ° C / <80% RH Automatic shutdown yes, after 15 minutes (can be deactivated) Battery 1 x 9 V block battery Dimensions 225 x 45 x 34 mm Weight 200 g  Scope of delivery  1 x thermo-hygrometer, 1 x carrying bag, 1 x battery and user manual

Thermo Hygrometer Datalogger Mini climate logger for long-term measurement of temperature and relative humidity, 32k memory, USB interface, software with dew point calculation, mini format, supply via long-life lithium battery  Technical specification Measuring range 0 ... 100 % r.F. / -40 … +105 °C  Accuracy ±3 % r.F. / ±1 °C Resolution 0,1 % r.F. / 0,1 °C  Sensor internal (hunidity and temperature) Memory capacity max. 32.000 values Measuring intervall adjustable 2 s, 5 s, 10 s, ... 24 h  Alarm limit free adjustable Status display 2 LED`s (Monitoring / Alarm) Interface USB Software scope of delivery Dew Point will be calculated after transfering datas to the supplied software (accurance ±2 °C) Supply interchangeable, 3,6 V Lithium- Battery (live time approx. 1 year)  Operating wall mount bracket - free position (e.g. table) Operating range - 40 ...+70 °C / 0 ... 100 % r.F.  Case ABS-Plastic  Software min Windows XP (auch 64 Bit)  Dimension 102 x 30 mm  Weight 25 g

Electronic moisture meter Tramex CME5  is a non-destructive meter for measuring moisture content instantly in concrete slabs per ASTM F2659, featuring Carbide Method equivalent scales for concrete and anhydrite screeds. Easy-to-use, giving precise and repeatable results, the Concrete Moisture Encounter allows the user to make multiple tests over a large area in the shortest possible time.  Characteristics Dimensions 163 x 85 x 43 mm Power supply 2 X 1.5V AA battery (incl.) Data transmission Bluetooth (mobile app available) Clear and easy to read analogue display. Moisture readings equivalent to the CM carbide method. No probing, drilling or mechanical damage to the surface necessary. Fast and accurate readings to a depth of approximately 20 mm (¾") in the slab. Non-destructive in operation. Hold function "freezes" reading when measuring surfaces where the top of the instrument is not visible and for easy data collection. Reproducible results. Spring-loaded contact pins compensate for unevenness and increase signal penetration.

Moisture Meter MT-D4 the MT-D4 measuring device is designed for use in moisture measurements on floors. The greatest advantage of the measuring device is a non-destructive moisture measuring method while maintaining high accuracy of the measurement result and easy handling of the device.   Characteristics Dimensions 147 x 89 x 33 mm Power supply 2 x AA batteries (incl.) Average working time with a complete set of new batteries: up to 20 hours Display graphic monochrome 128 x 64 pixels, size 61 x 33 mm with backlighting Operating temperature range 5° C - 40° C Accuracy ±0.5% Available scales 1 - concrete (0-6% H2O) 2 - cement screed (0-6% H2O) 3 - cement screed (0-4% CM) 4 - anhydrite screed (0-3.5% H2O) 5 - anhydrite screed (0-1.9% CM) 6 - Caisson scale 0.3-15.3 (0.3-15.3 m) 7 - Relative scale (0-100%)

Concrete Moisture Meter MT-200 the moisture meter was designed to measure the moisture content of concrete, gypsum, cement and EPS. This also allows the analysis of the moisture content of wood. The strengths of the applied method include: - high resolution - no ‚zero‘ calibration necessary - user friendliness  Characteristics Dimensions 142 x 79 x 24 mm Weight 200 g (with battery pack) Power supply 2 x 1,5V AA batteries (incl) Average life 20 hours (with new batteries) Display monochrome, with 128 x 63 pixel resolution and backlight Adjustable display orientation Operating temperature 5ºC bis 40ºC Measurement scales 9 1- Relative scale [%] Basic scale. It shows the relative humidity of the material. 2- anhydrite screed [weight %] The concrete scale is used for the measurement of anhydrite screed surfaces. Data are in weight percent water. 3- Anhydrite screed [CM %] The concrete scale is used for the measurement of anhydrite screed surfaces The CM figures are approximations. 4- Cement screed [weight %] The concrete scale is used for the measurement of cement screed surfaces. Data are in weight percent water. 5- Cement screed [CM %] The concrete scale is used for the measurement of cement screed surfaces. The CM figures are approximations. 6- Concrete [weight %] The concrete scale is used for themeasurement of concrete surfaces. She determines the percentage of the material contained in the tested material Water weight to the weight of this material in its completely dry Status. The scale ranges from 0% to 6%, with the value of 6% approximately the maximum physical water absorbency of the Concrete determined. 7 gypsum plaster [weight %] The scale is used to check the humidity of gypsum plaster. Of the Water content is expressed in weight percent. 8- Hardwood [weigth %] The scale is used to check the moisture of wood with the density of 0.6-0.9 [103 kg / m3] (e.g., oak). The water content is expressed as a percentage. 9- Softwood [weight %] The scale is used to check the moisture of wood with the density of 0.4-0.55 [103 kg / m3] (e.g., spruce). The water content is expressed as a percentage

Substrate Roughness Determination Set for determining the surface roughness depth to German ZTV Ing - Part1, Section 3 and determining the consumption of primer resin. Set includes form B1.3.3. and enables the user to determine and document the roughness depth according to the standard. for 12 measurements

CM measuring set according DIN 18560-4 Set CM measuring set with case consisting of: - pressure bottle with lid and manometer  - digital timer - 25 ampoules of calcium carbide - 3 ampoules of test water - rubble cup - 20 PE bags - flat chisel - club hammer 1000 g + locksmith hammer 300 g - brush - duster - electronic scale + calibration weight - weighing container - ball set - sample scoop - replacement seals - operation manual

Accessoires CM Device

Concrete Testing Hammer according to the Schmidt measuring principle. The concrete tester is always delivered factory calibrated when ordered, but can also be optionally (at an extra charge) laboratory calibrated and equipped with an ISO test test certificate.  - Simplest operation - Conversion table on the back of the unit - Correction aids for the measurement results in the operating instructions - ISO calibration certificate optionally available  Technical specification Measuring range 100 ... 600 kg/cm2 (~9.81 ... 58.9 N/mm2) Accuracy 18 kg/cm2 (~±1.8 N/cm2) Impact energy 2207 J Measuring display on scale 0 ... 100 (dimensionless) Scale for strength to convert the dimensionless values on the back, display in kg/cm2 (with angle indication) Correction table in the operating instructions Dimension Ø 66 x 280 mm Weight 1 kg  Scope of delivery Concrete test hammer, emery stone for surface preparation, carrying case

Pull Off Adhesion Tester automatic with 4x 50 mm stamp according to ASTM C1583 and ZTV-Ing for concrete, screed (class 1 according to DIN 51220 and DIN EN 1542; The adhesion tester uses hydraulic pressure to measure the force required to detach a specified test area of a coating from the substrate. The pressure is automatically built up by an electronically controlled hydraulic pump and displayed on the large touch screen. User-dependent sources of error are eliminated by the automatic system.   - Suitable for laboratory and construction site, as it is robust, handy and battery-operated.  - Bluetooth connection to the smartphone app (IOS & Android), USB connection and  WiFi for data transfer and storage of fracture images.  - Measurement memory for 100,000 measurements in up to 1,000 blocks  - User selectable pull rate, pull limit and pull hold time  - Automatic test execution  - Continuous force increase by means of electronically controlled pump  - Selectable units: MPa, psi, N/mm², N  - Measuring range: 0 - 3.8 MPa (referred to 50 mm dolly)  - Test stamp diameter: 50 mm (concrete test stamp)  - For e.g. metal, wood and plastic substrates  - Complies with ISO 4624 / 16276-1, ASTM D4541 / D7234 , AS/NZS 1580  and ZTV-ING (Class 1 according to DIN 51220)  - With rotating display on the touchscreen, depending on the orientation of the AT-A  - The robust touch screen is scratch and impact resistant  - Protection class IP65   - Redundant operation: In addition to the touch screen, there are 4 buttons  for operation, e.g. with gloves.  Adhesion tester compensates for unevenness. The unique, spherical dolly head is held by a ball bearing coupling and thus always ensures correct alignment.   Technical data Measuring range 0 ... 20 MPa (=N/mm²) Resolution 0.01 MPa (1 psi) Accuracy ±1 % (full measuring range) . Power supply and battery Dimensions 40 x 20 x 15 cm Weight 5,5 kg  Scope of delivery 1 x adhesion tester, 4 pcs. steel measuring heads (diam. 50 mm), 1 x abrasion pad, 1 x 2 comp. adhesive (to stick the measuring heads on the material surface to be tested), 1 set of cleaning pads, 1 x cutting tool, 1 x rechargeable battery, 1 x charging power supply, 1 x carrying case, 1 x calibration certificate, 1 x USB cable, 1 x carrying strap, 1 x operating instructions