Concrete Moisture Meter MT-200
the moisture meter was designed to measure the moisture content of concrete, gypsum, cement and EPS. This also allows the analysis of the moisture content of wood. The strengths of the applied method include:
- high resolution
- no ‚zero‘ calibration necessary
- user friendliness
Characteristics
Dimensions 142 x 79 x 24 mm
Weight 200 g (with battery pack)
Power supply 2 x 1,5V AA batteries (incl)
Average life 20 hours (with new batteries)
Display monochrome, with 128 x 63 pixel resolution and backlight
Adjustable display orientation
Operating temperature 5ºC bis 40ºC
Measurement scales 9
1- Relative scale [%] Basic scale. It shows the relative humidity of the material.
2- anhydrite screed [weight %] The concrete scale is used for the measurement of anhydrite screed surfaces.
Data are in weight percent water.
3- Anhydrite screed [CM %] The concrete scale is used for the measurement of anhydrite screed surfaces
The CM figures are approximations.
4- Cement screed [weight %] The concrete scale is used for the measurement of cement screed surfaces.
Data are in weight percent water.
5- Cement screed [CM %] The concrete scale is used for the measurement of cement screed surfaces.
The CM figures are approximations.
6- Concrete [weight %] The concrete scale is used for themeasurement of concrete surfaces. She determines the percentage
of the material contained in the tested material Water weight to the weight of this material in its
completely dry Status. The scale ranges from 0% to 6%, with the value of 6% approximately the
maximum physical water absorbency of the Concrete determined.
7 gypsum plaster [weight %] The scale is used to check the humidity of gypsum plaster. Of the Water content is expressed in
weight percent.
8- Hardwood [weigth %] The scale is used to check the moisture of wood with the density of 0.6-0.9 [103 kg / m3] (e.g., oak).
The water content is expressed as a percentage.
9- Softwood [weight %] The scale is used to check the moisture of wood with the density of 0.4-0.55 [103 kg / m3] (e.g.,
spruce). The water content is expressed as a percentage